Boikarabello ba tekano ea matte bo boholo ba profil
Lefoko le taōla, le nang le mahlakore a nang le mahlaseli a mabeli ka mahlakore a mabeli, le phekoloa ka ts'ebetso e phahameng ea Jima ho fihlela ts'ebetso e phahameng ea Jima. E fana ka ts'ebetso e phahameng masimong a libaka tse thata tse hatisitsoeng bakeng sa ho hlahisa thepa ea potoloho le tala ea mokhoa o motle oa mokhoa o hatisitsoeng ho fichang lipotoloho.
● Id: 76 mm, 152 mm
● Ronya bolelele ba bolelele / bophara ba bophara ba metsi
● Bolelele ba mantlha: E le kopo
● Litemana tsa mantlha: pampiri le ka tlase tsa polasetiki le tloaelo
● Sampu e ka fana ka faele
● Sephutheloana sa ka hare: se ka fana ka sephutheloana sa vacuum haeba ho hlokahala
●Boemo bo tlase ba fccl
●Sebopeho sa lijo-thollo sa foil ea koporo se etella pele ho feto-fetoha le maemo
●Ts'ebetso e Ntle e Ntle
●Fori e phehiloeng e khubelu kapa e ntšo
●Boemo bo tlase bo nolofalletsa ho etsa mokhoa o motle oa potoloho
●Ho lahla le ho rata mofuta oa lijo
●Mokhoa o motle oa FPC le PWB
●Chip on flex bakeng sa tataiso
●Bakeng sa FPC kapa ka hare
●Bakeng sa lits'ebetso tse fapaneng tsa lits'ebetso, ho tloha libakeng tsa potoloho ho ea ho bafani.
| Classified | Yuniti | TLHOKOMELISO | Mokhoa oa liteko | |||||
| Botenya ba lebitso | Um | 10 | 12 | 16 | 25 | 35 | IPC-4562a | |
| Boima ba sebaka | G / M² | 98 ± 4 | 107 ± 4 | 153 ± 5 | 228 ± 8 | 285 ± 10 | IPC-TM-650 2.2.12.2 | |
| Bohloeki | % | ≥99.8 | IPC-TM-650 2.3.15 | |||||
| ho ba thata | Lehlakoreng le leng (Ra) | ս m | ≤2.5 | ≤2.5 | ≤2.5 | ≤2.5 | ≤2.5 | IPC-TM-650 2.3.17 |
| Matte lehlakoreng (rz) | um | ≤4.0 | ≤4.5 | ≤ 40.5 | ≤6.0 | ≤8.0 | ||
| Matla a tšepe | Rt (23 ° C) | Mpa | ≥260 | ≥260 | ≥280 | ≥280 | ≥280 | IPC-TM-650 2.4.18 |
| HT (180 ° C) | ≥180 | ≥180 | ≥180 | ≥180 | ≥180 | |||
| Emplation | Rt (23 ° C) | % | ≥5 | ≥6 | ≥8 | ≥10 | ≥12 | IPC-TM-650 2.4.18 |
|
| HT (180 ° C) | ≥5 | ≥6 | ≥7 | ≥8 | ≥8 | ||
| Matla a peel (FR-4) | N / mm | ≥0.7 | 0.8 | 1.0 | 1.1 | 1.2 | IPC-TM-650 2.4.8 | |
|
| lbs/in | ≥4 | ≥4.6 | ≥5.7 | ≥6.3 | ≥6.9 | ||
| Pinholes le Porosity | Palo | No | IPC-TM-650 2.1.2 | |||||
| Anti-oxidization | Rt (23 ° C) |
| 180 |
| ||||
| Rt (200 ° Cer) |
| 60 | ||||||
Bophara ba naha: 520mm ea 1040mm, max.1300mmm e ka ho latela kopo ea moreki ea tsamaeang.
